上次有提到分享WinRE + ReagentC 達成 One Button Recovery 的做法給大家,今天就帶大家示範一遍:

由於ReagentC.exe需要Administrator的權限,所以我們還是先把他關閉會比較方便我們做佈署。

 

  • Disable the User Account Control (UAC)

Run—> UserAccountControlSettings.exe or UAC

Turn off UAC, move the slider to the Never notify position, and then click OK.

image

 

  • Enable the Windows Recovery Environment

1. Copy the boot.wim of the ISO sub-folder “Sources” from the PE folder to “Windows\System32\Recovery”.

image

2. Rename the boot.wim as winre.wim.

image

3. In the command line(cmd.exe) type “Reagentc /enable”.

clip_image007

4. Then type “Reagentc /info” , you will got below information.

Windows RE enabled: 0

Windows RE staged: 1

The Windows RE Loader with WinPE was ready to use.

 

  • Prepare Partition for WinRE and Recovery image

(請建立3個partition供WinRE & Recovery image使用)

1. In the command Line , type “Diskpart”

select disk 0 //選擇Disk 0 (list disk可以查看Disk,多硬碟時慎選)
create partition primary size=500 //建立分區500M用於存放Windows RE
format fs=ntfs label="Windows RE" quick //格式化 & 設定Label
assign letter=S //分配磁碟字元S
create partition primary //用剩下的空間建立分區 10 GB
format fs=ntfs label="Recovery" quick //格式化 & 設定Label
assign letter=R //分配磁碟字元R
exit

2. Copy the OS.wim that you Capture by imageX , and put it into “R:”.

(We will use the OS.wim be a source image for apply to C: in WinPE)

3. Create the folder “Recovery” at “S:” Drive , and Copy the WinRE.wim to the “Recovery” Folder.

image

 

  • Setup the WinPE as WinRE for One Button Recovery
  • 1. In the command line(cmd.exe) type “Reagentc /Disable”.

    clip_image004[6]

    2. Set the WinRE path as below:

    reagentc /setreimage /path S:\Recovery /target C:\Windows /bootkey 8500

    3. Then ,type “Reagentc /Enable”.

    4. Reboot the System , and before startup into loading bar , press “F11” (/bootkey 8500)

     

  • Set as Hidden Partition

1. In the command Line , type “Diskpart”

select disk 0 //選擇Disk 0 (list disk可以查看Disk,多硬碟時慎選)
Select Partition 2 //選擇Drive “S:”

Set ID=DE //建立分區500M用於存放Windows RE
Remove //格式化 & 設定Label
Select Partition 3 //分配磁碟字元S
Set ID=DE //建立分區500M用於存放Windows RE
Remove //格式化 & 設定Label
exit

P.S:ID=27 , DE –> Hidden Partition ,ID=07—>正常NTFS Partition

Enjoy the Lab.

Barry 發表在 痞客邦 PIXNET 留言(0) 人氣()